Hexie professional Tractor Front Mounted Garlic Harvest Machine supplier, Production has China Tractor Front Mounted Garlic Harvester Machine, Multiple rows Tractor Front Mounted Garlic Harvest Machine, New Design Tractor Front Mounted Garlic Harvest Machine, now Tractor mounted Garlic Digger Harvester For sale.China Tractor Front Mounted Garlic Harvester Machine, the machine is made of high-strength manganese steel with good hardness, vibration resistance, and no breakage. High-strength forged manganese steel knives, the sieve is 45# straight steel. The cylinder is a double return high-pressure engineering cylinder. Two-speed cast steel gearbox. Nano-original plastic controlled deep wheel, wear-resistant and crack-free. The whole machine is sprayed at a high temperature and is beautiful.
Multiple rows Tractor Front Mounted Garlic Harvest Machine, this tractor Front Mounted Garlic Harvest Machine has been practiced many times and the effect is very good. It has been highly recognized by garlic farmers and promoted products in the garlic area. Now Tractor Front Mounted Garlic Harvest Machine supplier Hexie Tractor mounted Garlic Digger Harvester For sale.
This Tractor mounted Garlic Digger Harvester is made of high-strength manganese plate with good hardness, anti-vibration, and no breakage. High-strength forged manganese steel knife, the sieve is 45 straight steel. The cylinder is a double return high-pressure engineering cylinder. Two-speed cast steel gearbox. Nano-original plastic controlled deep wheel, wear-resistant and crack-free.
The machine is high-temperature spray, beautiful and generous!
The machine is 170 cm long, 135 cm wide, and 90 cm high and weighs 200 kg. A single collection of garlic 6 ridges, under normal circumstances, harvest 2-3 acres of garlic per hour. Adapt to single-cylinder type 170-404 tractors with a wheelbase of no more than 130 cm. A 2800 B-type V-belt is generally used.
The side silk on both sides of the sieve can adjust the height behind the sieve, and it can be 5-8 cm from the ground. The gearbox has a low speed to the left and high speed to the right. The tractor uses a 150 cm working wheel as well. The speed of the vehicle is slower or slower than the first gear. The oil volume should not be too large. The anterior knife is deep to the root of the garlic, usually 10 cm.
Connect the unit to the front frame of the single-cylinder diesel engine, screw it to the front frame, and tighten the screws. The lower end of the front cylinder has the oil eye, the end of the high-pressure oil pipe with the elbow fixed, and the other end fixed to the outlet of the oil pressure lifting under the seat on. When working, use the lifting rod to adjust the lifting and lowering.
The lowering depends on the weight, and the depth can adjust the front wheel. Use around 2800 the B-shaped V-belt is straight before and after. There is a pinch wheel in the middle and the triangle is placed on the wheel. Triangle band does not too don’t be too tight, the 7-shaped iron is above the triangle. Before the ground, the ground is manually arranged, which is convenient for the machine to turn around and turn, and after the start, the machine will fall to a certain depth.
Going forward, it is not easy to hurt garlic, and the effect is better after adjustment.
Machine Name: Four-wheel drive garlic harvester
Harvesting width: 80cm
Excavation depth: 10-25cm
Supporting power: 170F gasoline engine
Working efficiency: 3-5/mu/hour
Structure quality: 100kg
Start mode: electric start / pull start
Structure size: 150*70*100cm