Use of Walking tractor Mounted Multi-function Reaper Binder


1. Preparation before starting
Careful inspection of the Walking tractor Mounted Multi-function Reaper Binder before use can eliminate hidden dangers and effectively prevent accidents. Generally, the diesel engine and the chassis should be inspected for oil leakage, air leakage, and water leakage. Check if the cooling water of the diesel engine is sufficient. Check the oil level and quality of the oil pan lubricant. Check the oil level of the gearbox oil. Unscrew the oil inspection screw plug on the tank, so that the gear oil can overflow from the screw hole. If it is insufficient, add it. Check the tension of the V-belt. The belt is too loose and should be adjusted. Check tire pressure. If the air pressure is too low, it should be made up.
2. Diesel engine start
Pull the Walking tractor Mounted Multi-function Reaper Binder clutch brake handle to the off position. Place the shift lever in the neutral position. Move the throttle handle to the starting position. Open the decompression handle with your left hand and hold the starter handle with your right hand to shake the crankshaft of the diesel engine. Gradually increase the speed, the left hand quickly relaxes the decompression handle, and the right hand continues to accelerate the shaking until the diesel engine starts. After the diesel engine is started, check if the oil pressure indicating the valve is raised. Listen to the sound of the diesel engine. Observe the smoke. After confirming that everything is normal, let the diesel engine run for a while so that the water temperature rises to a suitable temperature.
3. Tractor starts
After warming up, you can start. At the start, lift the walking tractor Mounted Multi-function Reaper Binder front support frame up. Without holding the steering handle, swing the handrail left and right until it stops. Pull the clutch brake lever to the clutch position.

Inquiry Now
Henan HeXie Machinery Co., Ltd.